🌟 Skrmod Primary Drive Pulley Carbon Fiber Belt Gear Pulley Remover for Surron Eride Pro

CUSTOMERS' WORDS ARE OUR BEST ADVERTISING

Youtube link: https://www.youtube.com/watch?v=H1WdZ1GAa8c

COMPATIBILITY

VEHICLE MODEL

⚠️Please place an order by choosing the corresponding model. The belts and pullys for each model are different.

- E Ride Pro LE1 SS S
- E Ride Pro SR
- Surron Light Bee X LBX
- Segway X260 Segway X160, 79 Bike
- Surron Ultra Bee UB

THICKNESS

The large pulley is approximately 22mm.
The small pulley is approximately 24.37mm
The belt is approximately 19mm.

USAGE RECOMMENDATIONS

If the power of your vehicle has increased and the carbon fiber belt has been upgraded, it is strongly recommended to use our carbon fiber belt and the belt pulley with the sand discharge function in combination.

1. 1. The power has been upgraded, but the belt and belt pulley have not been replaced:
      The wear on the original belt and belt pulley is greater, the belt is prone to breakage, and the belt pulley is prone to tip wear;
      👍It is recommended to replace our carbon fiber belt and our pulley with higher strength.
   2. Only the carbon fiber belt has been replaced:
      Because the carbon fiber belt is harder, the wear on the original flywheel is greater.
      👍It is recommended to replace our pulley suitable for the carbon fiber belt.
   3. Other ordinary belt pulleys have been replaced:
      Due to the absence of the sand discharge hole design, sediment often accumulates and cannot be discharged.
      🔥 It is recommended to replace our pulley with the highly difficult tooth surface hollowed-out sand discharge hole design! Paired with our carbon fiber belt, the overall service life is improved!

GEAR REMOVER

• There are 3 in a full set, which can be used on pulleys and sprockets.
• Please refer to the picture for the corresponding products to be used.
• (Yellow font: The gear ratio of the original pulley is available; Red font: The chain wheels with a gear ratio of 2.3/2.5 can be used)
  

COMPATIBLE MOTOR

• The stock motor
• Not suitable for KO motor (Please note this issue. After-sales will not be responsible for this issue.)

UPGRADED DESIGN

🔴BELT:

1. Material Upgrade: （The most important upgrade than GT4）

Upgraded to a 🌟carbon fiber belt.

2. Strength and Smoothness Upgrade: 

Increased to a more suitable width compared to the original, with strength exceeding 160% of the original. This enhances smoothness and avoids the risks associated with 19mm wide belts, which may cause wear on wheels and motors.

3. Custom Upgrade: 

Specifically designed for race-level and highly modified power setups.

❓ What's the difference between the Gates GT4 Belt?
1.Our materials are more advanced.
  - Gates' belts are (hydrogenated nitrile rubber and Aramid fiber)
     
  - While what we use is the top combination in the current factory, (hydrogenated nitrile rubber and carbon fiber thread). It was more expensive than theirs!
2. Our belts are more cost-effective.
 - Gates GT4 Power Grip Belt：$39.89 (from gritshift) 
   ⚠️Gates GT4 Power Grip Belt is not a carbon fiber belt.
-  Our Skrmod: For only 0.1 dollars, you can have a genuine carbon fiber belt! 

🔴PULLEY:

1. Design Upgrade: （The most important upgrade）

It features a highly challenging tooth surface hollowed-out sand discharge hole design, reducing the risk of belt breakage.

2. Material Upgrade:

It is made of 🌟No. 45 steel （The material used for factory molds has a very high hardness), and its wear resistance is several times higher than that of the original aluminum alloy pulley. So it is more durable and will not be easily stripped by the carbon fiber belt. It is chrome-plated to effectively prevent rust.

3. Structural Upgrade:

 Reinforced structure with intricate hollowed-out teeth, enhancing craftsmanship.

❓ What distinguishes us from other pulleys?
Our pulley has sand-discharging holes with high production difficulty. The production cost is higher, but it is more friendly to our customers. It greatly reduces sediment accumulation and lowers maintenance costs.
🌟 If you want to reduce your subsequent hidden consumption, our version is the best solution!

SHIPPING

surron and eride pro belt: air, expect ship on 6/29

- US region:

• • Products in stock are generally shipped from the US warehouse within 1 - 3 working days.
  • If it is a product on pre-sale, the inventory of the Chinese warehouse needs to be used. After transporting it to the US warehouse, it will be sent to you. It is estimated to take 5 - 7 working days (the time will be delayed if there is a customs inspection).

- Other regions:

• • Except in cases of special instructions, there is stock available. Orders will be shipped from China the next day after being placed.
  • Ship directly from China, most regions use UPS / DPD /DHL...It is generally shipped within 1 to 2 working days.
  • The tracking number will take a few days to be available. It takes time to declare information and for the other party to review.
  • It has been opened in many countries, if you encounter the problem of address delivery, please contact us! IG/FB @SkrmodOfficial

INSTALLATON

Gear Remove: here  (The tool is on sale.)

BOX INCLUDED

Option 'Belt': 
1 x Primary Carbon Fiber Belt

Option 'Pulley': 
- 1 x Front Primary Belt Drive Pulley
- 1 x Rear Primary Belt Drive Pulley

Option 'Gear Remover':
Full Set (3-Piece): 3 x tools
Chain Drive Tool: 1 x Chain Drive Tool
Pulley Tool: 1 x Pulley Tool

15-DAY PRICE GUARANTEE

- The lower price must be for the exact same product (including model, color, specifications, links and options).
- Price comparisons must be made with the total cost, including any shipping or handling fees.
- The 15-day period starts from the date you place your order with us.

DISCLAIMER

For details, please click: here