SKRMOD
E Ride Pro Motor Cover / CNC Pulley Guard
product description
E RIDE PRO SR / SS 3.0 / SS 2.0 / S
SKRMOD E Ride Pro Motor Cover / Easy Belt Check CNC Pulley Guard
The SKRMOD E Ride Pro / Eride Pro Motor Cover is a CNC aluminum pulley guard designed to protect the belt, pulley, and motor area while keeping belt inspection and adjustment easy. Built for E Ride Pro SR, SS 3.0, SS 2.0, and S models, this upgrade replaces the stock plastic cover with a stronger, cleaner, and more functional motor-side protection piece.
Perfect Fit
✅ E Ride Pro SR
✅ E Ride Pro SS 3.0
✅ E Ride Pro SS 2.0
✅ E Ride Pro S
Motor Compatibility
Compatible with Eride Pro stock motor and selected upgraded motor setups including EBMX, TORP, KO, and Ryuga motors.
Important: If your bike has an upgraded motor, please choose the upgraded motor option before checkout. For other motor brands or custom setups, please contact us with clear photos before ordering.
Not compatible with: Warp9 chain drive setup.
WHY UPGRADE?
The stock plastic E Ride Pro motor cover is mostly enclosed, making belt checks and adjustment less convenient. Riders often need to inspect belt tension, belt wear, pulley alignment, and motor area clearance, but the stock cover can make routine maintenance slower than it should be.
The SKRMOD E Ride Pro CNC motor cover solves this with a larger belt check opening and a stronger CNC aluminum guard structure. It keeps the motor and pulley area protected while making daily belt inspection much easier.
This part is also a practical upgrade for riders looking for an Eride Pro belt cover, E Ride Pro pulley cover, or CNC motor guard with easier belt check access.
KEY FEATURES
- Easy Belt Check Open Design: The enlarged opening gives more room to check belt tension, belt wear, pulley condition, and motor area clearance without removing the whole motor cover every time. Easier maintenance, less unnecessary disassembly.
- CNC Aluminum Pulley Guard Protection: Replaces the stock plastic motor cover with a CNC-machined aluminum guard. The thicker outer structure helps protect the motor, belt, and pulley area from light impacts, debris, and normal off-road use.
- Better Airflow Around the Cover Area: Compared with a fully closed plastic cover, the open design allows more airflow around the motor cover and pulley area.
- Premium Custom Look: Aggressive SKRMOD CNC styling with 7 anodized color options to match your E Ride Pro build.
SPECIFICATIONS
| Product | SKRMOD E Ride Pro Motor Cover / CNC Pulley Guard |
| Compatible Models | E Ride Pro SR / SS 3.0 / SS 2.0 / S |
| Motor Fitment | Eride Pro stock motor, EBMX, TORP, KO, Ryuga motor setups |
| Main Upgrade | Easy belt check access for belt tension, belt wear, and pulley inspection |
| Material | CNC-machined aluminum |
| Installation Type | Replacement motor cover. Do not stack over the stock plastic motor cover. |
| Not Compatible | Warp9 chain drive setup |
INSTALLATION NOTES
- Replace the stock cover: Remove the original plastic motor cover before installation. This SKRMOD motor cover is not designed to be stacked on top of the stock cover.
Installation reference: remove the original plastic motor cover first, then install the SKRMOD CNC motor cover as a replacement.
- Check clearance before riding: After installation, check belt clearance, pulley clearance, motor cover alignment, and all fasteners before your first ride.
- Belt rubbing solution: If the belt rubs the motor cover or pulley area, adding a small spacer / shim to raise the motor cover can usually solve the clearance issue quickly. Recheck belt clearance and fasteners before riding.
- SR fitment note: Some E Ride Pro SR models may require an approximately 3.23mm shim for proper fitment. This may vary by setup and is not required for every SR installation.
WHAT'S INCLUDED
1 x SKRMOD E Ride Pro CNC Motor Cover / Pulley Guard
FAQ
Does this fit E Ride Pro SR, SS 3.0, SS 2.0, and S?
Yes. This motor cover is designed for E Ride Pro SR, SS 3.0, SS 2.0, and S models. Some SR setups may require an approximately 3.23mm shim for proper fitment.
Does it fit Eride Pro stock, EBMX, TORP, KO, or Ryuga motors?
Yes. This E Ride Pro motor cover is available for stock and selected upgraded motor setups including EBMX, TORP, KO, and Ryuga motors. If your bike has an upgraded motor, please choose the upgraded motor option before checkout.
Can I install it over the original plastic motor cover?
No. The original plastic motor cover must be removed first. This is a replacement E Ride Pro motor cover, not an overlay cover.
Will this make belt tension checks easier?
Yes. The enlarged opening gives you more room to check belt tension, belt wear, and pulley condition without removing the entire cover every time.
What if the belt rubs the motor cover after installation?
If the belt rubs the motor cover or pulley area, adding a small spacer / shim to raise the motor cover can usually solve the clearance issue quickly. Always recheck belt clearance and fasteners before riding.
Does this fit Warp9 chain drive?
No. This E Ride Pro motor cover is not compatible with Warp9 chain drive setup.
SHIPPING
In Stock: Ships from our CN and US warehouses for fast delivery.
15-Day Price Guarantee
The lower price must be for the exact same product, including model, color, specifications, links, and options. Price comparisons must be made with the total cost, including shipping or handling fees. The 15-day period starts from the date you place your order with us.
Disclaimer
Modifications carry risks. SKRMOD is not liable for damages, injuries, installation errors, belt clearance issues, pulley clearance issues, motor compatibility issues, wiring issues, or safety problems related to improper installation, misuse, or unsupported custom setups. For details, please click: here.
Color Variation Disclaimer
Colors may vary slightly due to anodizing batches, photography lighting, and screen settings. The final product color shall prevail.