M6 Heavy-Duty Clamping
Larger M6 hardware and a reinforced clamping structure provide stronger handlebar support than a conventional M5 stem setup.
SKRMOD
E Ride Pro Direct Stem T-REX | SKRMOD Heavy-Duty M6
Color:Champagne
Quantità:
product description
Built to Bite the Bar
E Ride Pro Direct Stem — T-REX M6 Heavy-Duty
Built for riders who demand a stronger connection to the front end. The SKRMOD E Ride Pro Direct Stem replaces the conventional M5 stem structure with larger M6 hardware, a reinforced clamping body, and a planted 31.8mm Bar Mount designed for aggressive electric dirt bike riding.
M6
Bolt Structure
31.8mm
Bar Clamp
+20mm
Approx. Rise
+30mm
Forward Reach
Why T-REX
More Structure. More Bite. More Control.
Every part of the stem is shaped around a stronger, more secure connection to the E Ride Pro front end without adding unnecessary bulk.
Reinforced Direct Mount
The strengthened base creates a more rigid connection between the handlebar and upper fork crown for a solid, planted cockpit feel.
20mm Rise. 30mm Forward.
The revised handlebar position supports a natural standing posture while creating additional room around the display and front accessories.
CNC-Machined Aluminum
Precision CNC machining delivers accurate fitment, clean edges, a premium finish, and the distinctive SKRMOD T-REX profile.
Fitment
Designed for the E Ride Pro Cockpit
This direct-mount stem is compatible with the following E Ride Pro models.
E Ride Pro S
E Ride Pro SS 2.0
E Ride Pro SS 3.0
E Ride Pro SR
31.8mm Handlebars
Fitment note: Designed for E Ride Pro SS / SR and S platform builds using a compatible four-bolt direct-mount upper fork crown. This stem works with the SKRMOD E Ride Pro screen mount. It is not designed for the OEM screen bracket or OEM stem lock ring.
Specifications
Technical Details
- 31.8mm Bar Mount
- M6 Heavy-Duty bolt configuration
- Approximately 20mm / 0.79 in rise
- Approximately 30mm / 1.18 in forward extension
- CNC-machined aluminum alloy
- Compatible four-bolt direct-mount upper fork crown
- GIGIGO light-bracket mounting points
- Laser-etched installation marks
In the Box
What’s Included
- 1 × SKRMOD T-REX stem
- 1 × set of 304 stainless steel screws
Optional 12.9-grade high-strength handlebar clamp bolts are available separately.
Installation
Install It Right. Keep It Locked In.
- Confirm that your handlebar clamp diameter is 31.8mm.
- Select the correct bolt length for your fork crown and installed height.
- Align all bolts correctly before applying final torque.
- Tighten the handlebar clamp bolts evenly in a cross pattern.
- Confirm that the handlebar cannot rotate inside the clamp.
- Recheck bolt tightness after the first ride.
Refer to the installation guide in the product image gallery. If you are unsure about fitment or bolt length, contact SKRMOD before installation.
Shipping
Shipping
In Stock: Ships from our CN and US warehouses for fast delivery.
E Ride Pro Direct Stem FAQ
Fitment, handlebar size, installation, hardware, and cockpit compatibility information for the SKRMOD T-REX.
Which E Ride Pro models does the T-REX stem fit?
It is designed for the E Ride Pro S, SS 2.0, SS 3.0, and SR. Confirm that your bike uses a compatible four-bolt direct-mount upper fork crown before ordering.
Does this direct stem fit E Ride Pro SS / SR models?
Yes. It fits the SS 2.0, SS 3.0, and SR when used with the correct upper fork crown and display-mount configuration. It is also compatible with the E Ride Pro S.
Is the T-REX compatible with 31.8mm handlebars?
Yes. It is designed specifically for handlebars with a 31.8mm clamping diameter. It is not intended for 35mm handlebars.
Why does the T-REX use M6 bolts instead of M5 bolts?
The larger M6 fasteners work with the reinforced clamping body to provide stronger handlebar support and a more secure cockpit feel than a conventional M5 stem structure.
How much does the stem raise the E Ride Pro handlebar?
It raises the handlebar by approximately 20mm, or 0.79 inch. Manual measurements may vary slightly depending on the complete fork and cockpit setup.
How far does the T-REX move the handlebar forward?
It moves the handlebar forward by approximately 30mm, or 1.18 inches. The additional reach also creates more room around the display and front accessories.
Does it work with the original E Ride Pro screen bracket?
No. The stem is designed to work with the SKRMOD E Ride Pro screen mount and display bracket. It is not designed for the OEM screen bracket or OEM stem lock ring.
Can I install a GIGIGO light bracket on this stem?
Yes. The stem includes mounting points for a compatible GIGIGO light bracket. The light and additional mounting accessories are not included unless stated in the selected product option.
Are 12.9-grade handlebar clamp bolts included?
No. A set of 304 stainless steel screws is included. Optional 12.9-grade high-strength handlebar clamp bolts can be purchased separately.
What should I check after installing the stem?
Confirm the handlebar diameter and bolt length, make sure every fastener is aligned correctly, and tighten the clamp bolts evenly in a cross pattern. Check that the handlebar cannot rotate inside the clamp and recheck all bolts after the first ride.
15-Day Price Guarantee
If you find the exact same product, including model, color, specifications, links, and options, at a lower total price including shipping within 15 days of your order, we’ll refund the difference.
Disclaimer
Modifications carry risks. SKRMOD is not responsible for damages, injuries, installation errors, fitment issues, bolt length issues, handlebar clamp issues, or safety problems caused by improper installation, misuse, incompatible setups, or unauthorized modification. For details, please click: here.
Color Variation Disclaimer
Colors may vary slightly due to anodizing batches, photography lighting, and screen settings. The final product color shall prevail.